Useful information

[Jonkie]

Thanks you for this threat

[cm2009]

this is good information

[cm2009]

also very helpful

[vietnambehold]

I heard that the java maximum size can be installed on Renoir only 2.0mb??

And this phone doesnt support Unicode font? so we can read Vietnamese file?

Is it true?

[FunkyKeefy]

Same problem for me, no one can hear me

[N1nja]

Thanks, very usefull

[sahoo56]

I've found this one in this post but i can't find the "right" value to edit the volume

my rx7_db(dec) is originally set to -900 and i have edited the line to -100

It's a little more strong




To increase the volume of your ringtones:

1. Go to the service software menu 3845#*910#

(as if you are going to dial for a call)

2. Go to (2) Test Device

3. Then (8) Sound

4. Then (7) Audio CAL Tool

5. Then (1) Sound Calibration

6. And (3) CHANGE SOUND DB

7. Change in snd_device_type "SPK_PHONE"

8. Change in snd_method_type_type "MIDI"

9. Change in Item_Title "rx X _db (December)" (where X is the value of your choice)

10. The values "Get Data" should be modified for that click in the "Data Set" (the numeric keypad is displayed) to enter the desired number and then click OK. To have a negative value, click the button "minus "(less) then click OK to change it.

Personally I just changed the value of "rx7_db(dec)" since this is the highest setting and you only normally have one volume set at one time.

11. Click on the arrow to go back 1 time (top right) or the "Multi" (middle button)

12. Finally, click on "Write on Sound DB to EFS (top line)

13. You can change the time or the parameter (s) use the red button (hang up) to exit test.

If you want to test your new volume setting you will need to ring your mobile from another phone. Testing from the volume selection menu on your phone WON'T play your changes.

Hello, i m doing the same but volume not increasing. Even my handset not retaining the changed values. what to do? help required?

[sahoo56]

I take no credit for these tips and would like to thank those people who brought them to this forum:


Increase the sound of the speaker (mp3 player):

1. Go to the service software menu 3845#*910#

(as if you are going to dial for a call)

2. Go to (2) Test Device

3. Then (8) Sound

4. Then (7) Audio CAL Tool

5. Then (1) Sound Calibration

6. And (3) CHANGE SOUND DB

7. Change in snd_device_type "SPK_MEDIA_CLOSED"

8. Change in snd_method_type_type "MIDI"

9. Change in Item_Title "rx X _db (December)" (where X is the value of your choice)

10. The values "Get Data" should be modified for that click in the "Data Set" (the numeric keypad is displayed) to enter the desired number and then click OK. To have a negative value, click the button "minus "(less) then click OK to change it.

PLEASE NOTE

Decibels are factory ranks among rx0_db (silence) at -5000 and rx20_db (500?) (Max).

Factory Settings:

rx0_db(dec):-5000; (Silence)

rx0_db (December): -5000 (Silence)

rx1_db(dec):-2400;

rx1_db (December): -2400;

rx2_db(dec):-2300;

rx2_db (December): -2300;

rx3_db(dec):-2200;

rx3_db (December): -2200;

rx4_db(dec):-2100;

rx4_db (December): -2100;

rx5_db(dec):-2000;

rx5_db (December): -2000;

rx6_db(dec):-1900;

rx6_db (December): -1900;

rx7_db(dec):-1800;

rx7_db (December): -1800;

rx8_db(dec):-1750;

rx8_db (December): -1750;

rx9_db(dec):-1650;

rx9_db (December): -1650;

rx10_db(dec):-1550;

rx10_db (December): -1550;

rx11_db(dec):-1450;

rx11_db (December): -1450;

rx12_db(dec):-1400;

rx12_db (December): -1400;

rx13_db(dec):-1300;

rx13_db (December): -1300;

rx14_db(dec):-1200;

rx14_db (December): -1200;

rx15_db(dec):-1100;

rx15_db (December): -1100;

rx16_db(dec):-1000;

rx16_db (December): -1000;

rx17_db(dec):-900;

rx17_db (December): -900;

rx18_db(dec):-800;

rx18_db (December): -800;

rx19_db(dec):-700;

rx19_db (December): -700;

rx20_db(dec):-600; (Maximum)

rx20_db (dec) -600 (Maximum)
Example data after changes have been made:

rx0_db(dec):-5000; (Silence)

rx0_db (December): -5000 (Silence)

rx1_db(dec):-2800;

rx1_db (December): -2800;

rx2_db(dec):-2600;

rx2_db (December): -2600;

rx3_db(dec):-2400;

rx3_db (December): -2400;

rx4_db(dec):-2250;

rx4_db (December): -2250;

rx5_db(dec):-2150;

rx5_db (December): -2150;

rx6_db(dec):-1900;

rx6_db (December): -1900;

rx7_db(dec):-1800;

rx7_db (December): -1800;

rx8_db(dec):-1700;

rx8_db (December): -1700;

rx9_db(dec):-1600;

rx9_db (December): -1600;

rx10_db(dec):-1500;

rx10_db (December): -1500;

rx11_db(dec):-1400;

rx11_db (December): -1400;

rx12_db(dec):-1300;

rx12_db (December): -1300;

rx13_db(dec):-1200;

rx13_db (December): -1200;

rx14_db(dec):-1100;

rx14_db (December): -1100;

rx15_db(dec):-1000;

rx15_db (December): -1000;

rx16_db(dec):-900;

rx16_db (December): -900;

rx17_db(dec):-750;

rx17_db (December): -750;

rx18_db(dec):-650;

rx18_db (December): -650;

rx19_db(dec):-200;

rx19_db (December): -200;

rx20_db(dec):200; (Maximum)

rx20_db (December): 200 (Maximum)

For rx20_db (December) it is possible to go up to 500 but I would suggest that (at risk of damaging the speaker) not to go beyond 200. DO NOT GO BEYOND THAT LEVEL AT THE RISK OF DAMAGE TO YOUR SPEAKER

11. Click on the arrow to go back 1 time (top right) or the "Multi" (middle button)

12. Finally, click on "Write on Sound DB to EFS (top line)

13. You can change the time or the parameter (s) use the red button (hang up) to exit test.

Thanx for great tips. However, I am not being able to increase speaker volume by following these steps. Once i try to repeat these steps, i found the default values. Plz help................

[BillG]

Can anyone tell me how do I increase the volume of the speaker during a normal telephone call? Not the speakerphone, but a normal telephone call with the phone pressed against my ear?